The packaging machine consists of a rotating disc that presents the following stages:

• First stage: placement of glasses. At this stage, a mechanical device is responsible for dosing the vessel from a vertical loader. This charger is pneumatic drive and one is needed for each vessel mouth diameter.
• Second stage: dosage of the product. This is volumetric through the cylinder and piston, with a rotary valve at the end. Its drive is pneumatic and has a runner that allows the displacement of the piston to be regulated and thus easily vary the dosage from 0 to 500grs.
• Third stage: placement of the aluminum foil. The placement is done by removing the sheet (from a charger) with a vacuum suction cup, and positioning it on the glass. For the different packaging measurements, there are various accessories.
• Fourth stage: sealed. It is carried out through a temperature gag controlled by a digital pyrometer and also powered by a pneumatic cylinder.
• Fifth stage: dated.
• Sixth stage: vessel extractor system. This has a mechanism that raises the glass and another that moves it out of the disc. The machine is delivered for a measure of glasses.

1. The total construction of the machine is made of AISI 304 stainless steel.
2. Power 220 volts, alternating current. Working air pressure: 6kgs / cm2.
3. Product entry into the dispenser: 1 1/2 ″ male or Danish joint.
4. PLC controlled movements.
5. Plate and glass dispensers in other sizes.
6. Rotary lung disc at the end of the process.
7. Product lung at the inlet of the dosing valve.
8. Plastic overlay collocator.
9. Temperature date.